Search the site
Via Trento, 18
21040 Sumirago Varese
21040 Sumirago Varese
Via Trento, 18
21040 Sumirago Varese
21040 Sumirago Varese
Different accessories
They are used to make the joints on the tape. Ensure a perfect contact between all the wires of stainless steel, improving the qualities of the current. If you notice a spark from a thread to another, fear not: cut the ribbon and put a buckle. You will have re-established good electrical connection. The splicer buckle allows the slack in the tape and to connect with the connectors to bring electricity properly.
CONNECTION BUCKLES
They are used to make junctions on the tape. The junction buckle allows tensioning the tape and connecting with the connectors in order to bring the electricity correctly.
Rif. 24
RIBBON BUCKLE H 4CM
Ensures perfect contact between all the stainless steel wires, improving the current carrying capacity of the tape itself.
€ 2,20 (iva inc.)
Rif. 22
RIBBON BUCKLE H 2CM
Ensures perfect contact between all the stainless steel wires, improving the current carrying capacity of the tape itself.
€ 1,35 (iva inc.)
Rif. 39
RIBBON BUCKLE H 1,3 CM
Ensures perfect contact between all the stainless steel wires, improving the current carrying capacity of the tape itself.
€ 1,15 (iva inc.)
Rif. 51
MARTYR (75MM x 75MM)
It absorbs the blows of mace for poles Rif. 47P - Rif. 47M
€ 26,30 (iva inc.)
Rif. 49
PLANT POLES R7
For fiberglass posts.
€ 26,30 (iva inc.)
SIGNALS AND ROLLING TAPE
Rif. 27
SIGNALS
In Italian, by law, must be put on all the fences near roads and walkways every 100 m
€ 1,85 (iva inc.)
Rif. 32
WINDER/ UNWINDER
For coils of 250 m 40mm tape, and 500 m, 20 mm and 13 mm
€ 18,00 (iva inc.)
HANDLE GATE
Rif. 11A
HANDLE FOR HIGH TAPE
Insulated gate handle is designed specifically for our 40mm tape with an external spring that tensions the tape gate. You can fix it on the tensioner Ref 44V.
€ 9,90 (iva inc.)
Rif. 11B
HANDLE FOR SMALL TAPE
Insulated gate handle is designed for 20mm/13mm tape.
€ 9,90 (iva inc.)
Rif. 11X
INOX HANDLE FOR HIGH TAPE
This gate handle is not insulated and is made for 40mm tape, all stainless steel. No one can touch it if not been switched off.
€ 9,90 (iva inc.)
ELECTRIFICATION DEVICES
Rif. 52
CIRCUIT ISOLATING SWITCH
This will isolate runs of fence or whole fields to enable you to work on them without having to turn off the whole system. It cuts off unused fields if your energiser is not too powerful
€ 27,10 (iva inc.)
Rif. 53A
NO-LIGHTNING SYSTEM
Connected to the screw that tightens the contact-holder turnbuckles or the corner pieces, it ensures a point of contact between the lightning that falls on the tape and the ground.
€ 37,90 (iva inc.)
Rif. 52B TOGLE
SWITCH TO SOIL WITH POOR CONDUCTIVITY
Here's a switch that can link a portion of the tapes on the ground and then allow the horse that touches both the tapes, closes the circuit and take the shock
€ 64,90 (iva inc.)
ELECTRICAL EQUIPMENT
Rif. T1
GROUND ROD (1,5MT)
Dissipates to the ground. For very large fences, consider three of them connected in a triangle.
€ 19,50 (iva inc.)
Rif. CLIPSBP
CLIPS FOR TAPE
Thanks to this clips you can fix the excess tape.
Rif. 53
SWITCH NO-LIGHTNING
It blocks the passage of electricity, it has a cable that is fixed to the earth socket, attracting the lightning to the ground.
€ 52,00 (iva inc.)