Electrified fences

13 mm tape accessories

Why choose a 13mm tape?

Our aim is to: reduce the cost of your enclosures without compromising the quality, durability, electrical conductivity and safety for your horses!
In fact, thanks to the quality of our tape, the same diameter of the various steel wires (5 by 0.40 mm), polyethylene (0.50 mm) and the two shockproof wire of 1mm as those of the tape by 40mm, although if, visually, the small tape does not look good as the 40mm, the quality is at least comparable! It is not suitable for fencing spirited horses, foals, or dangerous areas

OUR CATALOG

INSULATOR AND TENSIONER

For 13 mm tape you can use the insulator Ref. 9N

Isolatore Rif. 17F
Rif. 17F

PIG TAIL FOR FIBERGLASS STAKES

These are for use with thinner tapes only. They are supplied in easy-slide-on form for fiberglass stakes.

€ 1,05 (iva inc.)

Isolatore Rif. 17V
Rif. 17V

PIG TAIL FOR WOOD STAKES

These are for use with thinner tapes only. They are supplied with a screw for wood stakes.

€ 1,05 (iva inc.)

Isolatore Rif. 17B
Rif. 17B

PIG TAIL FOR METAL POLES

These are for use with thinner tapes only. They are supplied with a iron bolts for poles.

€ 1,05 (iva inc.)

Isolatore Rif. 10V
Rif. 10V

ROUND INSULATOR FOR WOOD

This is only suitable for use with electric string or wire. It can also be used as an alternative gate `latch' for the gate (R11) when placed at the end of the tape run.

€ 0,35 (iva inc.)

Isolatore Rif. 10B
Rif. 10B

INSULATOR WITH BOLT FOR METAL POLES

This is only suitable for use with electric string or wire. It can also be used as an alternative gate `latch' for the gate (R11) when placed at the end of the tape run.

€ 1,00 (iva inc.)

Isolatore Rif. 33
Rif. 33

DOUBLE HOOK

You can fix the tape with a knot.
Or as a gate to fix the handle.

€ 3,00 (iva inc.)

Tenditore porta contatto nastro basso Rif. 35V
Rif. 8X

200 SCREWS FOR INSULATORS

200 screws for insulators.

€ 16,10 (iva inc.)

TENSIONER

Tenditore porta contatto nastro basso Rif. 35V
Rif. 35V

TENSIONER + 2 WOODEN SCREWS

Stainless steel buckle strong and durable, the plastic insulator. Also available in Ref. 35B with bolt

€ 10,20 (iva inc.)

Tenditore porta contatto nastro basso Rif. 35V
Rif. 35B

TENSIONER + 2 BOLTS

Stainless steel buckle strong and durable, the plastic insulator. With bolts

€ 9,80 (iva inc.)

The buckles Ref. 35T allow to derive a third line with the tape from a single tensioner Ref. 44, they are useful for example for subdividing a large fence into several separate areas.

Tenditore porta contatto Rif. 35N
Rif. 35N

T BUCKLE

Buckle necessary to create the T buckle, combined with Ref. 35T.

€ 5,60 (iva inc.)

Tenditore porta contatto Rif. 35T
Rif. 35T

BUCKLE

Buckle which together with Ref. 35V or 35B allows to derive a third line with the ribbon.

€ 5,80 (iva inc.)

Tenditori porta contatto Rif. CLIPS
Rif. CLIPS

CLIPS

Provided normally attached to the plastic of Ref. 44 or Ref. 45. They can be ordered separately. Block the terminal part of the tape. The tape that remains can be blocked with the use of the two tweezers which must be removed from the molded plastic.

€ 1,10 (iva inc.)

How to fix the tape:

Lift the clasp, insert the dubbed tape and lower the barb, the Ref. 44 can be screws (Ref. 44V)
or bolts (Ref. 44B).
Just as easily you can remove just pull with one hand to remove the tension.
Secure the excess tape with clips.