Accessories for 40mm tape

Rif. 8V

ISOLATOR + 2 PLASTIC SCREWS

Robust, locks the tape without damaging it, thanks to its two plastic screws. If you want to fix it on a wooden pole you need just two screws

Rif. 8N

SPECIAL ISOLATOR 4CM

If you want to install it on a fibreglass pole with a diameter of 12 mm, just toss it without screws. Simply with a hammer, a little attention (has holes prepared) and there he is on the Fiberglass pole.

Rif. 8V-1

ISOLATORE NASTRO 4CM

Equal to the Rif.8V isolator but with a different closing system. Robust, locks the tape without damaging it, thanks to its two plastic screws. If you want to fix it on a wooden pole you need just two screws

Rif. 8N-1

ISOLATORE NASTRO 4CM

Equal to the Rif.8N isolator but with a different closing system. If you want to install it on a fibreglass pole with a diameter of 12 mm, just toss it without screws. Simply with a hammer, a little attention (has holes prepared) and there he is on the Fiberglass pole.

Rif. 8S

ISOLATOR + 1 STRAP

On the trees with a strap.

Rif. 8C

ISOLATOR + 2 CLAMPS

On a stake is fixed with clamps.

Rif. 8R

ISOLATORE+ 2 RIVETS

On a metal pole is fixed with rivets.

Rif. 8W

ISOLATORE + 4 WOODEN SCREWS

It blocks the ribbon without damaging it, thanks to its four wooden screws.

Rif. 17N

ISOLATOR AS R16 SCREW-ON STAKES

Insulator Screw-on stakes diameter less than 12mm.

Rif. 16N

ISOLATOR IN WINDY REGIONS

Less strong than the Ref. 8, not recommended in windy regions.

Rif. TPIW

ISOLATOR PVC

Insolators for poles in pvc, and our stakes TPG
Rif.TPIWH: Isolator white
Rif.TPIBR: Isolator brown
Rif.TPIGR: Isolator green

Rif. 15

ISOLATOR

For all kinds of tape, excellent in box at the top of the stallions.

Rif. 8X

200 SCREWS FOR INSULATORS

200 Screws for insulators.

Rif. 45V

CORNER ISOLATOR + 2 SCREWS

Its solidity allows to tighten the tape in the corners with two screws (V).

Rif. 45B

CORNER ISOLATOR + 2 BOLTS

To be fixed on iron pole with bolts or trees with straps.

Rif. 45U

SPACER FOR CORNER

Mounted on two pins that distances it from the fence allows the use of fences spaced.

Rif. 44U

SPACER TENSIONER

Allows use of the tensioner contact carrier Ref44 also on fences spaced.

Rif. 13U

EXTENDED INSULATOR FOR WOODEN POLES

This insulator is ideal where a field is dangerously fenced (barbed or normal wire, broken posts and rails) or temporarily rented where minimal disturbance is necessary. It keeps animals safely away from the existing fence. It is also useful for stopping animals from fighting over passive fences. It is nailed into existing wood stakes.

Rif. 13L

EXTENDED INSULATOR PIG TAIL

Spacer that hangs on net or wire with his terminal.

Rif. 44V

TENSIONER + 2 WOODEN SCREWS

Tensioner given by the assembly of Rif. 45V and Rif.44N

Rif. 44B

TENSIONER + 2 BOLTS

Tensioner given by the assembly of Rif. 45V and Rif.44N

Rif. 44T

T BUCKLE

Allows to derive a third line with the tape by a single Ref 44. Must be added to Ref 44N or Ref 45V locked in the buckle.

Rif. 44N

BUCKLE

Buckle needed to create the T Buckle

Rif. 44X

BUCKLE ISOLATED

Stainless steel buckle tensioner isolated

Rif. CLIPS

CLIPS 

Provided normally attached to the plastic of Ref. 44 or Ref. 45. They can be ordered separately. Block the terminal part of the tape.
The tape that remains can be blocked with the use of the two tweezers which must be removed from the molded plastic.

€ 1,10 (iva inc.)